gil/CONTRIBUTING.md

Contributing to Boost.GIL

Boost.GIL is a member of Boost libraries.

If you wish to contribute a new feature or a bug fix, please follow the workflow explained in this document.

Table of Content

• Prerequisites
• Getting started with Git workflow
  • 1. Clone Boost super-project
  • 2. Checkout Boost.GIL development branch
  • 3. Fork Boost.GIL repository on GitHub
  • 4. Submit a pull request
  • 5. Update your pull request
• Development
  • Using Boost.Build
  • Using CMake
  • Using Faber
• Guidelines

Prerequisites

• C++11 compiler
• Experience with git command line basics.
• Familiarity with build toolset and development environment of your choice.
• Although this document tries to present all commands with necessary options, it may be a good idea to skim through the Boost Getting Started chapters, especially if you are going to use Boost.Build for the first time.

Getting started with Git workflow

First, you need learn some minimal basics of the modular Boost super-project workflow.

The following steps are based on the official Boost Getting Started.

NOTE: For brevity, commands below use notation for POSIX-like operating systems and you may need to tweak them for Windows systems.

1. Clone Boost super-project

The preparation involves the following steps:

1. Clone the Boost super-project

   git clone --recursive --jobs 8 https://github.com/boostorg/boost.git
   

2. Switch the Boost super-project to desired branch, master or develop

   cd boost
   git checkout master
   

   TIP: Modular Boost Library Maintenance guide, for more realistic test environment, recommends to develop and test individual Boost library against other Boost libraries as defined by the Boost super-project master branch:

   cd boost
   git checkout master
   git pull
   git submodule update --init --recursive --jobs 8
   

3. Build the b2 driver program for Boost.Build engine.

   ./bootstrap.sh
   ./b2 --version
   

   TIP: For more convenient path-less invocation, you can copy the b2 program to a location in your PATH.

4. Optionally, create full content of /boost virtual directory with all Boost headers linked from the individual modular Boost libraries. If you skip this step, executing b2 to run tests will automatically create the directory with all headers required by Boost.GIL and tests.

   ./b2 headers
   

TIP: If something goes wrong, you end up with incomplete or accidentally modified files in your clone of the super-project repository, or you simply wish to start fresh, then you can clean and reset the whole repository and its modules:

git clean -xfd
git submodule foreach --recursive git clean -xfd
git reset --hard
git submodule foreach --recursive git reset --hard
git submodule update --init --recursive --jobs 8

2. Checkout Boost.GIL development branch

Regardless if you decide to develop again master (recommended) or develop branch of the Boost super-project, you should always base your contributions (ie. topic branches) on Boost.GIL develop branch.

1. Go to the Boost.GIL library submodule.

   cd libs/gil
   

2. Checkout the develop branch and bring it up to date

   git checkout develop
   git branch -vv
   git pull origin develop
   

3. Fork Boost.GIL repository on GitHub

Follow Forking Projects guide to get personal copy of boostorg/gil repository from where you will be able to submit new contributions as pull requests.

Add your fork as git remote to the Boost.GIL submodule:

cd libs/gil
git remote add username https://github.com/username/gil.git

4. Submit a pull request

All Boost.GIL contributions should be developed inside a topic branch created by branching off the develop branch of boostorg/gil.

IMPORTANT: Pull Requests must come from a branch based on develop, and never on master.

NOTE: The branching workflow model Boost recommends is called Git Flow.

For example:

cd libs/gil
git checkout develop
git checkout -b feature/foo

Now, you are set to to develop a new feature for Boost.GIL, then git add and git commit your changes.

Once it's finished, you can submit it as pull request for review:

cd libs/gil
git checkout feature/foo
git push username feature/foo

Finally, sign in to your GitHub account and create a pull request.

Your pull request will be automatically built and tests will run on Travis CI and AppVeyor (see README for builds status). Please, keep an eye on those CI builds and correct any problems detected in your contribution by updating your pull request.

5. Update your pull request

In simplest (and recommended) case , your the pull request you submitted earlier has a single commit, so you can simply update the existing commit with any modifications required to fix failing CI builds or requested by reviewers.

First, it is a good idea to synchronize your topic branch with the latest changes in the upstream develop branch:

cd libs/gil
git checkout develop
git pull origin develop
git checkout feature/foo
git rebase develop

Next, make your edits.

Finally, git commit --amend the single-commit in your topic branch and update the pull request:

cd libs/gil
git checkout feature/foo
git add -A
git commit --amend
git push --force username feature/foo

WARNING: Ensure your pull request has a single commit, otherwise the force push can corrupt your pull request.

If you wish to update pull request adding a new commit, then create new commit and issue regular push:

git commit -m "Fix variable name"
git push username feature/foo

Development

Boost.GIL is a header-only library which does not require sources compilation. Only test runners and example programs have to be compiled.

By default, Boost.GIL uses Boost.Build to build all the executables.

We also provide configuration for two alternative build systems:

• CMake
• Faber

NOTE: The CMake and Faber are optional and the corresponding build configurations for Boost.GIL do not offer equivalents for all Boost.Build features. Most important difference to recognise is that Boost.Build will automatically build any other Boost libraries required by Boost.GIL as dependencies.

Using Boost.Build

The b2 invocation explains available options like toolset, variant and others.

Simply, just execute b2 to run all tests built using default variant=debug and default toolset determined for your development environment.

TIP: Pass b2 option -d 2 to output complete action text and commands, as they are executed. It is useful to inspect compilation flags.

If no target or directory is specified, everything in the current directory is built. For example, all Boost.GIL tests can be built and run using:

cd libs/gil
../../b2

Run core tests only specifying location of directory with tests:

cd libs/gil
../../b2 test

Run all tests for selected extension (from Boost root directory, as alternative):

./b2 libs/gil/io/test
./b2 libs/gil/numeric/test
./b2 libs/gil/toolbox/test

Run I/O extension tests bundled in target called simple:

./b2 libs/gil/io/test//simple

TODO: Explain I/O dependencies (libjpeg, etc.)

Using CMake

Maintainer: @mloskot

NOTE: CMake configuration does not build any dependencies required by Boost.GIL like Boost.Test and Boost.Filesystem libraries or any third-party image format libraries used by the I/O extension.

The provided CMake configuration allows a couple of ways to develop Boost.GIL:

1. Using Boost installed from binary packages in default system-wide location.
2. Using Boost installed from sources in arbitrary location (CMake may need -DBOOST_ROOT=/path/to/boost/root, see FindBoost documentation for details).
3. Using cloned Boost super-project, inside modular libs/gil. This mode requires prior deployment of boost virtual directory with headers and stage build of required libraries, for example:

   ./b2 headers
   ./b2 variant=debug --with-test --with-filesystem stage
   ./b2 variant=release --with-test --with-filesystem stage
   

   or, depending on specific requirements, more complete build:

   ./b2 variant=debug,release address-model=32,64 --layout=versioned --with-test --with-filesystem stage
   

Using the installed Boost enables a lightweight mode for the library development, inside a stand-alone clone Boost.GIL repository and without any need to clone the whole Boost super-project.

Here is an example of such lightweight workflow in Linux environment (Debian-based):

• Install required Boost libraries

  sudo apt-get update
  sudo apt-get install libboost-dev libboost-test-dev libboost-filesystem-dev
  

• Optionally, install libraries required by the I/O extension

  sudo apt-get update
  sudo apt install libtiff-dev libpng-dev libjpeg-dev
  

• Clone Boost.GIL repository

  git clone https://github.com/boostorg/gil.git
  cd gil
  

• Configure build with CMake

  mkdir _build
  cd _build/
  cmake ..
  -- The CXX compiler identification is GNU 7.3.0
  -- Check for working CXX compiler: /usr/bin/c++
  -- Check for working CXX compiler: /usr/bin/c++ -- works
  -- Detecting CXX compiler ABI info
  -- Detecting CXX compiler ABI info - done
  -- Detecting CXX compile features
  -- Detecting CXX compile features - done
  -- Boost version: 1.65.1
  -- Found the following Boost libraries:
  --   unit_test_framework
  --   filesystem
  --   system
  -- Boost_INCLUDE_DIRS=/usr/include
  -- Boost_LIBRARY_DIRS=/usr/lib/x86_64-linux-gnu
  -- Found JPEG: /usr/lib/x86_64-linux-gnu/libjpeg.so
  -- Found ZLIB: /usr/lib/x86_64-linux-gnu/libz.so (found version "1.2.11")
  -- Found PNG: /usr/lib/x86_64-linux-gnu/libpng.so (found version "1.6.34")
  -- Found TIFF: /usr/lib/x86_64-linux-gnu/libtiff.so (found version "4.0.9")
  -- Configuring Boost.GIL core tests
  -- Configuring Boost.GIL IO tests
  -- Configuring Boost.GIL Numeric tests
  -- Configuring Boost.GIL Toolbox tests
  -- Configuring done
  -- Generating done
  -- Build files have been written to: /home/mloskot/gil/_build
  

• List available CMake targets

  cmake --build . --target help
  

• Build selected target with CMake

  cmake --build . --target gil_test_pixel
  

• List available CTest targets

  ctest --show-only | grep Test
  

• Run selected test with CTest

  ctest -R gil.tests.core.pixel
  

Using Faber

Maintainer: @stefanseefeld

TODO: Describe

Guidelines

Boost.GIL is a more than a decade old mature library maintained by several developers with help from a couple of dozens contributors. It is important to maintain consistent design, look and feel. Thus, below a few basic guidelines are listed.

First and foremost, make sure you are familiar with the official Boost Library Requirements and Guidelines.

Second, strive for writing idiomatic C++11, clean and elegant code.

NOTE: The Boost.GIL source code does not necessary represent clean and elegant code to look up to. The library has recently entered the transition to C++11. Major refactoring overhaul is ongoing.

Maintain structure your source code files according to the following guidelines:

• Name files in meaningful way.
• Put copyright and license information in every file
• If your changes meet a certain threshold of originality, add yourself to the copyright notice. Do not put any additional authorship or file comments (eg. no \file for Doxygen), revision information, etc.
• In header, put #include guard based on header path and file name

  #ifndef BOOST_GIL_<DIR1>_<DIR2>_<FILE>_HPP
  #define BOOST_GIL_<DIR1>_<DIR2>_<FILE>_HPP
  ...
  #endif
  

• Make sure each header is self-contained, i.e. that they include all headers they need.
• All public headers should be placed in boost/gil/ or boost/gil/<component>/.
• All non-public headers should be placed boost/gil/detail or boost/gil/<component>/detail.
• All public definitions should reside in scope of namespace boost { namespace gil {...}}.
• All non-public definitions should reside in scope of namespace boost { namespace gil { namespace detail {...}}}.
• Write your code to fit within 90 columns of text (see discussion on preferred line length in GIL).
• Indent with 4 spaces, not tabs. See the .editorconfig file for details. Please, do not increases the indentation level within namespace.